我的研华会员注册

「我的研华」为研华客户专属服务平台。成为研华会员,您将收到最新产品资讯、研讨会邀请和线上商店特殊优惠。

立即注册,启用您的会员服务!

422 Wiring

2018-10-26 FAQ Document No.1-00000202

Solution:

  • How do I wire a 422 network?

    Q: HOW DO I CONNECT TWO RS-422 DEVICES TOGETHER? A1: The connections for two devices with Receive and Transmit RS-422 signals is shown in Figure 1. This represents the RS-422 connections of a device, card or converter. This is a "4-wire" connection, one pair of twisted wires is used for Receive, the other for Transmit. Signal Ground is used as a Common reference. Figure 1 applies to many Ethernet/Serial Servers and a few B&B RS-485 Converters such as the 485SD9TB, 485LPRJ, 485SD9R, 485SD9RJ. A2: There are many conditions that use a "2-wire" RS-422, where a signal master uses one wire pair and ground to talk to multiple devices that receive only (no Transmit). RS-422 is used to go the distance and to multi-drop to connect multiple listeners. This connection is commonly used for Security/Surveillance Video Cameras to control the Pan/Tilt/Zoom (available from Pelco or others), or to connect displays for signage indoors or outdoors, clock displays, etc. Depending on the device receiver type, up to 32 (12K impedance nodes) or 11 RS-422 receivers can be connected without a repeater.

    4wire_rs422_fig2

    2017-09-14

    Download

    4wire_rs422_fig2

    2017-09-14

    Download

Please leave your contact information, we will reply to your message in a timely manner. *

必填项

당사는 회원 기반 서비스 제공을 위해 다음과 같이 개인정보를 수집하여 이용, 제공, 파기 합니다.

구분 수집항목 이용 목적 이용∙보유기간
1:1 문의 필수 이름, 이메일, 전화번호, 회사명, 국가, 상담내용 고객의 문의 대응 및 분쟁해결 등을 위함 소비자의 불만 또는 분쟁처리에 관한 기록: 3년
선택 제품, 시리얼넘버 효율적인 상담 대응
선택 뉴스레터 수신 동의 여부 신규 서비스/상품, 할인 이벤트 안내 법정 의무 보유 기간
您是否愿意订阅研华的营销资讯,包括电子报、活动邀请和产品更新?您可随时取消订阅。*
您是否愿意订阅研华的营销资讯,包括电子报、活动邀请和产品更新?您可随时取消订阅。 为必填*

注意: 如果您已订阅,选择 “不了,谢谢” 将会取消您现有的订阅。

您是否同意根据研华的 隐私政策 处理您的个人资料?*
您是否同意根据研华的 隐私政策 处理您的个人资料? 为必填*
必填项
必填项